s%
➜ ~ ssh xu4 ~
X11 forwarding request failed on channel 0
Last login: Fri Mar 18 10:04:36 2016 from fe80::3e97:eff:fe83:a73%eth0
[root@xu4-nixi:~]# cd /backup
[root@xu4-nixi:/backup]# ls -lathr
ls: reading directory .: Input/output error
total 0
[root@xu4-nixi:/backup]# dmesg
[ 0.000000] Booting Linux on physical CPU 0x100
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.2.0 (nixbld1@xu4-nixi) (gcc version 4.9.3 (GCC) ) #1-NixOS SMP PREEMPT Thu Jan 1 00:00:01 UTC 1970
[ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Hardkernel Odroid XU4
[ 0.000000] cma: Reserved 128 MiB at 0xb6800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Samsung CPU ID: 0xe5422001
[ 0.000000] On node 0 totalpages: 514560
[ 0.000000] free_area_init_node: node 0, pgdat c0bf3100, node_mem_map ee624000
[ 0.000000] Normal zone: 1710 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 190464 pages, LIFO batch:31
[ 0.000000] HighMem zone: 324096 pages, LIFO batch:31
[ 0.000000] Running under secure firmware.
[ 0.000000] PERCPU: Embedded 12 pages/cpu @ee58c000 s20416 r8192 d20544 u49152
[ 0.000000] pcpu-alloc: s20416 r8192 d20544 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 512850
[ 0.000000] Kernel command line: systemConfig=/nix/store/nlphxwbs7lmfhqr4045dqm4k48hcnbwl-nixos-15.09.git.061d167M init=/nix/store/nlphxwbs7lmfhqr4045dqm4k48hcnbwl-nixos-15.09.git.061d167M/init loglevel=4
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1890524K/2058240K available (8313K kernel code, 575K rwdata, 2676K rodata, 664K init, 396K bss, 36644K reserved, 131072K cma-reserved, 1165312K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0ac3910 (10991 kB)
.init : 0xc0ac4000 - 0xc0b6a000 ( 664 kB)
.data : 0xc0b6a000 - 0xc0bf9e7c ( 576 kB)
.bss : 0xc0bfc000 - 0xc0c5f350 ( 397 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] L2C: failed to init: -19
[ 0.000000] Switching to timer-based delay loop, resolution 41ns
[ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000009] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[ 0.000975] Console: colour dummy device 80x30
[ 0.001193] console [tty0] enabled
[ 0.001229] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000)
[ 0.001254] pid_max: default: 32768 minimum: 301
[ 0.001441] Security Framework initialized
[ 0.001480] AppArmor: AppArmor initialized
[ 0.001493] Yama: becoming mindful.
[ 0.001601] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001622] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002902] Initializing cgroup subsys blkio
[ 0.002939] Initializing cgroup subsys memory
[ 0.003008] Initializing cgroup subsys devices
[ 0.003038] Initializing cgroup subsys freezer
[ 0.003066] Initializing cgroup subsys net_cls
[ 0.003092] Initializing cgroup subsys perf_event
[ 0.003118] Initializing cgroup subsys debug
[ 0.003211] CPU: Testing write buffer coherency: ok
[ 0.003267] ftrace: allocating 25779 entries in 76 pages
[ 0.053603] CPU0: update cpu_capacity 448
[ 0.053627] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
[ 0.053983] Setting up static identity map for 0x40008280 - 0x400082d8
[ 0.054452] ARM CCI driver probed
[ 0.054704] Exynos MCPM support installed
[ 0.075693] CPU1: update cpu_capacity 1535
[ 0.075703] CPU1: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.080646] CPU2: update cpu_capacity 1535
[ 0.080655] CPU2: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.085672] CPU3: update cpu_capacity 1535
[ 0.085681] CPU3: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.090647] CPU4: update cpu_capacity 1535
[ 0.090656] CPU4: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.095770] CPU5: update cpu_capacity 448
[ 0.095780] CPU5: thread -1, cpu 1, socket 1, mpidr 80000101
[ 0.100770] CPU6: update cpu_capacity 448
[ 0.100779] CPU6: thread -1, cpu 2, socket 1, mpidr 80000102
[ 0.105746] CPU7: update cpu_capacity 448
[ 0.105755] CPU7: thread -1, cpu 3, socket 1, mpidr 80000103
[ 0.105880] Brought up 8 CPUs
[ 0.105949] SMP: Total of 8 processors activated (384.00 BogoMIPS).
[ 0.105962] CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x1a)
[ 0.105973] CPU: This may indicate a broken bootloader or firmware.
[ 0.107074] devtmpfs: initialized
[ 0.138916] evm: security.SMACK64
[ 0.138936] evm: security.SMACK64EXEC
[ 0.138947] evm: security.SMACK64TRANSMUTE
[ 0.138958] evm: security.SMACK64MMAP
[ 0.138969] evm: security.ima
[ 0.138980] evm: security.capability
[ 0.139474] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
[ 0.141278] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
[ 0.149781] xor: measuring software checksum speed
[ 0.194966] arm4regs : 1052.000 MB/sec
[ 0.244965] 8regs : 680.000 MB/sec
[ 0.294965] 32regs : 660.000 MB/sec
[ 0.294980] xor: using function: arm4regs (1052.000 MB/sec)
[ 0.295183] pinctrl core: initialized pinctrl subsystem
[ 0.296048] regulator-dummy: no parameters
[ 0.297004] NET: Registered protocol family 16
[ 0.299239] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.315014] cpuidle: using governor ladder
[ 0.330006] cpuidle: using governor menu
[ 0.335722] gpiochip_add: registered GPIOs 0 to 7 on device: gpy7
[ 0.335977] gpiochip_add: registered GPIOs 8 to 15 on device: gpx0
[ 0.336216] gpiochip_add: registered GPIOs 16 to 23 on device: gpx1
[ 0.336465] gpiochip_add: registered GPIOs 24 to 31 on device: gpx2
[ 0.336710] gpiochip_add: registered GPIOs 32 to 39 on device: gpx3
[ 0.338503] gpiochip_add: registered GPIOs 40 to 47 on device: gpc0
[ 0.338752] gpiochip_add: registered GPIOs 48 to 55 on device: gpc1
[ 0.338994] gpiochip_add: registered GPIOs 56 to 62 on device: gpc2
[ 0.339250] gpiochip_add: registered GPIOs 63 to 66 on device: gpc3
[ 0.339498] gpiochip_add: registered GPIOs 67 to 68 on device: gpc4
[ 0.339729] gpiochip_add: registered GPIOs 69 to 76 on device: gpd1
[ 0.339999] gpiochip_add: registered GPIOs 77 to 82 on device: gpy0
[ 0.340227] gpiochip_add: registered GPIOs 83 to 86 on device: gpy1
[ 0.340458] gpiochip_add: registered GPIOs 87 to 92 on device: gpy2
[ 0.340683] gpiochip_add: registered GPIOs 93 to 100 on device: gpy3
[ 0.340908] gpiochip_add: registered GPIOs 101 to 108 on device: gpy4
[ 0.341150] gpiochip_add: registered GPIOs 109 to 116 on device: gpy5
[ 0.341376] gpiochip_add: registered GPIOs 117 to 124 on device: gpy6
[ 0.342769] gpiochip_add: registered GPIOs 125 to 132 on device: gpe0
[ 0.343001] gpiochip_add: registered GPIOs 133 to 134 on device: gpe1
[ 0.343233] gpiochip_add: registered GPIOs 135 to 140 on device: gpf0
[ 0.343467] gpiochip_add: registered GPIOs 141 to 148 on device: gpf1
[ 0.343694] gpiochip_add: registered GPIOs 149 to 156 on device: gpg0
[ 0.343929] gpiochip_add: registered GPIOs 157 to 164 on device: gpg1
[ 0.344159] gpiochip_add: registered GPIOs 165 to 166 on device: gpg2
[ 0.344394] gpiochip_add: registered GPIOs 167 to 170 on device: gpj4
[ 0.345805] gpiochip_add: registered GPIOs 171 to 178 on device: gpa0
[ 0.346040] gpiochip_add: registered GPIOs 179 to 184 on device: gpa1
[ 0.346284] gpiochip_add: registered GPIOs 185 to 192 on device: gpa2
[ 0.346521] gpiochip_add: registered GPIOs 193 to 197 on device: gpb0
[ 0.346751] gpiochip_add: registered GPIOs 198 to 202 on device: gpb1
[ 0.347001] gpiochip_add: registered GPIOs 203 to 206 on device: gpb2
[ 0.347240] gpiochip_add: registered GPIOs 207 to 214 on device: gpb3
[ 0.347471] gpiochip_add: registered GPIOs 215 to 216 on device: gpb4
[ 0.347712] gpiochip_add: registered GPIOs 217 to 224 on device: gph0
[ 0.349145] gpiochip_add: registered GPIOs 225 to 231 on device: gpz
[ 0.352693] exynos-audss-clk 3810000.audss-clock-controller:: setup completed
[ 0.364354] EXYNOS5420 PMU initialized
[ 0.377419] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.377437] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.490357] raid6: int32x1 gen() 121 MB/s
[ 0.575074] raid6: int32x1 xor() 91 MB/s
[ 0.660316] raid6: int32x2 gen() 146 MB/s
[ 0.745296] raid6: int32x2 xor() 97 MB/s
[ 0.830354] raid6: int32x4 gen() 142 MB/s
[ 0.915245] raid6: int32x4 xor() 98 MB/s
[ 1.000409] raid6: int32x8 gen() 144 MB/s
[ 1.085263] raid6: int32x8 xor() 91 MB/s
[ 1.085278] raid6: using algorithm int32x2 gen() 146 MB/s
[ 1.085290] raid6: .... xor() 97 MB/s, rmw enabled
[ 1.085302] raid6: using intx1 recovery algorithm
[ 1.087400] SCSI subsystem initialized
[ 1.087945] usbcore: registered new interface driver usbfs
[ 1.088077] usbcore: registered new interface driver hub
[ 1.088330] usbcore: registered new device driver usb
[ 1.089420] s3c-i2c 12c80000.i2c:: slave address 0x00
[ 1.089444] s3c-i2c 12c80000.i2c:: bus frequency set to 65 KHz
[ 1.090204] s3c-i2c 12c80000.i2c:: i2c-2: S3C I2C adapter
[ 1.093124] NetLabel: Initializing
[ 1.093141] NetLabel: domain hash size = 128
[ 1.093152] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.093240] NetLabel: unlabeled traffic allowed by default
[ 1.093543] clocksource: Switched to clocksource mct-frc
[ 1.211063] AppArmor: AppArmor Filesystem Enabled
[ 1.236762] NET: Registered protocol family 2
[ 1.237766] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 1.237873] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
[ 1.238094] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.238168] UDP hash table entries: 512 (order: 2, 24576 bytes)
[ 1.238223] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
[ 1.238626] NET: Registered protocol family 1
[ 1.239278] RPC: Registered named UNIX socket transport module.
[ 1.239294] RPC: Registered udp transport module.
[ 1.239307] RPC: Registered tcp transport module.
[ 1.239320] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.239702] Trying to unpack rootfs image as initramfs...
[ 1.569699] Freeing initrd memory: 4408K (cfbb2000 - d0000000)
[ 1.574165] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 1.574343] audit: initializing netlink subsys (disabled)
[ 1.574405] audit: type=2000 audit(1.555:1): initialized
[ 1.594485] VFS: Disk quotas dquot_6.6.0
[ 1.594929] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.601461] NFS: Registering the id_resolver key type
[ 1.601509] Key type id_resolver registered
[ 1.601524] Key type id_legacy registered
[ 1.601561] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.602873] Key type cifs.idmap registered
[ 1.602900] ntfs: driver 2.1.32 [Flags: R/W].
[ 1.604151] JFS: nTxBlock = 8192, nTxLock = 65536
[ 1.611305] Key type big_key registered
[ 1.613725] Key type asymmetric registered
[ 1.613750] Asymmetric key parser 'x509' registered
[ 1.613875] bounce: pool size: 64 pages
[ 1.614326] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 1.614607] io scheduler noop registered
[ 1.614631] io scheduler deadline registered
[ 1.614719] io scheduler cfq registered (default)
[ 1.615197] phy phy-video-phy@10040728:.0: Looking up phy-supply from device tree
[ 1.615218] phy phy-video-phy@10040728:.0: Looking up phy-supply property in node /video-phy@10040728 failed
[ 1.615942] phy phy-video-phy@10040714:.1: Looking up phy-supply from device tree
[ 1.615962] phy phy-video-phy@10040714:.1: Looking up phy-supply property in node /video-phy@10040714 failed
[ 1.616224] phy phy-video-phy@10040714:.2: Looking up phy-supply from device tree
[ 1.616243] phy phy-video-phy@10040714:.2: Looking up phy-supply property in node /video-phy@10040714 failed
[ 1.616482] phy phy-video-phy@10040714:.3: Looking up phy-supply from device tree
[ 1.616500] phy phy-video-phy@10040714:.3: Looking up phy-supply property in node /video-phy@10040714 failed
[ 1.616736] phy phy-video-phy@10040714:.4: Looking up phy-supply from device tree
[ 1.616754] phy phy-video-phy@10040714:.4: Looking up phy-supply property in node /video-phy@10040714 failed
[ 1.617939] phy phy-12130000.phy:.5: Looking up phy-supply from device tree
[ 1.617959] phy phy-12130000.phy:.5: Looking up phy-supply property in node /phy@12130000 failed
[ 1.618214] phy phy-12130000.phy:.6: Looking up phy-supply from device tree
[ 1.618234] phy phy-12130000.phy:.6: Looking up phy-supply property in node /phy@12130000 failed
[ 1.618476] phy phy-12130000.phy:.7: Looking up phy-supply from device tree
[ 1.618495] phy phy-12130000.phy:.7: Looking up phy-supply property in node /phy@12130000 failed
[ 1.618845] phy phy-12130000.phy:.8: Looking up phy-supply from device tree
[ 1.618865] phy phy-12130000.phy:.8: Looking up phy-supply property in node /phy@12130000 failed
[ 1.619649] exynos5_usb3drd_phy 12100000.phy:: Looking up vbus-supply from device tree
[ 1.619670] exynos5_usb3drd_phy 12100000.phy:: Looking up vbus-supply property in node /phy@12100000 failed
[ 1.619685] 12100000.phy: supply vbus not found, using dummy regulator
[ 1.619798] exynos5_usb3drd_phy 12100000.phy:: Looking up vbus-boost-supply from device tree
[ 1.619818] exynos5_usb3drd_phy 12100000.phy:: Looking up vbus-boost-supply property in node /phy@12100000 failed
[ 1.619832] 12100000.phy: supply vbus-boost not found, using dummy regulator
[ 1.619943] phy phy-12100000.phy:.9: Looking up phy-supply from device tree
[ 1.619963] phy phy-12100000.phy:.9: Looking up phy-supply property in node /phy@12100000 failed
[ 1.620232] phy phy-12100000.phy:.10: Looking up phy-supply from device tree
[ 1.620252] phy phy-12100000.phy:.10: Looking up phy-supply property in node /phy@12100000 failed
[ 1.620644] exynos5_usb3drd_phy 12500000.phy:: Looking up vbus-supply from device tree
[ 1.620664] exynos5_usb3drd_phy 12500000.phy:: Looking up vbus-supply property in node /phy@12500000 failed
[ 1.620679] 12500000.phy: supply vbus not found, using dummy regulator
[ 1.620789] exynos5_usb3drd_phy 12500000.phy:: Looking up vbus-boost-supply from device tree
[ 1.620808] exynos5_usb3drd_phy 12500000.phy:: Looking up vbus-boost-supply property in node /phy@12500000 failed
[ 1.620822] 12500000.phy: supply vbus-boost not found, using dummy regulator
[ 1.620935] phy phy-12500000.phy:.11: Looking up phy-supply from device tree
[ 1.620954] phy phy-12500000.phy:.11: Looking up phy-supply property in node /phy@12500000 failed
[ 1.621219] phy phy-12500000.phy:.12: Looking up phy-supply from device tree
[ 1.621238] phy phy-12500000.phy:.12: Looking up phy-supply property in node /phy@12500000 failed
[ 1.627688] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330
[ 1.627708] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6
[ 1.635431] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330
[ 1.635451] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 1.642946] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330
[ 1.642967] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 1.645226] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330
[ 1.645245] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
[ 1.645386] xenfs: not registering filesystem on non-xen platform
[ 1.790715] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.793957] 12c00000.serial:: ttySAC0 at MMIO 0x12c00000 (irq = 58, base_baud = 0) is a S3C6400/10
[ 1.794776] 12c10000.serial:: ttySAC1 at MMIO 0x12c10000 (irq = 59, base_baud = 0) is a S3C6400/10
[ 1.795573] 12c20000.serial:: ttySAC2 at MMIO 0x12c20000 (irq = 60, base_baud = 0) is a S3C6400/10
[ 1.798577] console [ttySAC2] enabled
[ 1.799476] 12c30000.serial:: ttySAC3 at MMIO 0x12c30000 (irq = 61, base_baud = 0) is a S3C6400/10
[ 1.822167] brd: module loaded
[ 1.835841] loop: module loaded
[ 1.837763] exynos-dwc3 usb@12000000:: no suspend clk specified
[ 1.837788] exynos-dwc3 usb@12000000:: Looking up vdd33-supply from device tree
[ 1.838483] exynos-dwc3 usb@12400000:: no suspend clk specified
[ 1.838506] exynos-dwc3 usb@12400000:: Looking up vdd33-supply from device tree
[ 1.839208] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.839232] ehci-exynos: EHCI EXYNOS driver
[ 1.839528] of_get_named_gpiod_flags: can't parse 'samsung,vbus-gpio' property of node '/usb@12110000[0]'
[ 1.839828] exynos-ehci 12110000.usb:: EHCI Host Controller
[ 1.839885] exynos-ehci 12110000.usb:: new USB bus registered, assigned bus number 1
[ 1.840217] exynos-ehci 12110000.usb:: irq 116, io mem 0x12110000
[ 1.848620] exynos-ehci 12110000.usb:: USB 2.0 started, EHCI 1.00
[ 1.848985] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.849003] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.849018] usb usb1: Product: EHCI Host Controller
[ 1.849033] usb usb1: Manufacturer: Linux 4.2.0 ehci_hcd
[ 1.849048] usb usb1: SerialNumber: 12110000.usb:
[ 1.850406] hub 1-0:1.0: USB hub found
[ 1.850474] hub 1-0:1.0: 3 ports detected
[ 1.852043] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.852087] ohci-exynos: OHCI EXYNOS driver
[ 1.852509] exynos-ohci 12120000.usb:: USB Host Controller
[ 1.852564] exynos-ohci 12120000.usb:: new USB bus registered, assigned bus number 2
[ 1.852755] exynos-ohci 12120000.usb:: irq 116, io mem 0x12120000
[ 1.907944] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.907962] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.907977] usb usb2: Product: USB Host Controller
[ 1.907991] usb usb2: Manufacturer: Linux 4.2.0 ohci_hcd
[ 1.908006] usb usb2: SerialNumber: 12120000.usb:
[ 1.909373] hub 2-0:1.0: USB hub found
[ 1.909442] hub 2-0:1.0: 3 ports detected
[ 1.911508] s3c-rtc 101e0000.rtc:: failed to find rtc source clock
[ 1.922578] vdd_ldo1: 1000 mV
[ 1.923991] LDO2: at 1800 mV
[ 1.925926] vdd_ldo3: 1800 mV
[ 1.927339] LDO4: at 1800 mV
[ 1.929276] vdd_ldo5: 1800 mV
[ 1.931248] vdd_ldo6: 1000 mV
[ 1.933176] vdd_ldo7: 1800 mV
[ 1.935110] vdd_ldo8: 1800 mV
[ 1.938913] vdd_ldo9: ramp_delay not set
[ 1.939444] vdd_ldo9: 3000 mV
[ 1.941385] vdd_ldo10: 1800 mV
[ 1.943324] vdd_ldo11: 1000 mV
[ 1.945216] vdd_ldo12: 1800 mV
[ 1.947039] vdd_ldo13: 1800 <--> 3300 mV at 3300 mV
[ 1.948375] LDO14: at 3000 mV
[ 1.952476] vdd_ldo15: ramp_delay not set
[ 1.953012] vdd_ldo15: 3100 mV
[ 1.954986] vdd_ldo16: 2200 mV
[ 1.956921] tsp_avdd: 3300 mV
[ 1.958337] LDO18: at 1800 mV
[ 1.962753] vdd_sd: 2800 mV
[ 1.964218] LDO20: at 1800 mV
[ 1.965629] LDO21: at 1800 mV
[ 1.967050] LDO22: at 1200 mV
[ 1.968468] LDO23: at 1100 mV
[ 1.970472] tsp_io: 2800 mV
[ 1.971910] LDO25: at 1800 mV
[ 1.973865] vdd_ldo26: 3000 mV
[ 1.975284] LDO27: at 1000 mV
[ 1.976705] LDO28: at 3300 mV
[ 1.978114] LDO29: at 1800 mV
[ 1.979545] LDO30: at 1800 mV
[ 1.980955] LDO31: at 1800 mV
[ 1.982379] LDO32: at 1800 mV
[ 1.983838] LDO33: at 1800 mV
[ 1.985259] LDO34: at 3000 mV
[ 1.986693] LDO35: at 1600 mV
[ 1.988113] LDO36: at 1800 mV
[ 1.989534] LDO37: at 1800 mV
[ 1.990967] LDO38: at 2800 mV
[ 1.992903] vdd_mif: 800 <--> 1300 mV at 1100 mV
[ 1.994856] vdd_arm: 800 <--> 1500 mV at 1000 mV
[ 1.996793] vdd_int: 800 <--> 1400 mV at 1000 mV
[ 1.998751] vdd_g3d: 800 <--> 1400 mV at 1000 mV
[ 2.000700] vdd_mem: 800 <--> 1400 mV at 1200 mV
[ 2.002645] vdd_kfc: 800 <--> 1500 mV at 1025 mV
[ 2.004592] vdd_1.0v_ldo: 800 <--> 1500 mV at 900 mV
[ 2.006426] vdd_1.8v_ldo: 800 <--> 1500 mV at 1225 mV
[ 2.008254] vdd_2.8v_ldo: 3000 <--> 3750 mV at 5000 mV
[ 2.010378] vdd_vmem: 2850 mV
[ 2.017490] s5m-rtc s2mps14-rtc: rtc core: registered s5m-rtc as rtc0
[ 2.022035] thermal thermal_zone0: failed to read out thermal zone (-22)
[ 2.022082] exynos-tmu 10060000.tmu:: Looking up vtmu-supply from device tree
[ 2.023109] thermal thermal_zone1: failed to read out thermal zone (-22)
[ 2.023152] exynos-tmu 10064000.tmu:: Looking up vtmu-supply from device tree
[ 2.024160] thermal thermal_zone2: failed to read out thermal zone (-22)
[ 2.024203] exynos-tmu 10068000.tmu:: Looking up vtmu-supply from device tree
[ 2.025262] thermal thermal_zone3: failed to read out thermal zone (-22)
[ 2.025304] exynos-tmu 1006c000.tmu:: Looking up vtmu-supply from device tree
[ 2.026411] thermal thermal_zone4: failed to read out thermal zone (-22)
[ 2.026454] exynos-tmu 100a0000.tmu:: Looking up vtmu-supply from device tree
[ 2.028913] s3c2410-wdt 101d0000.watchdog:: watchdog inactive, reset disabled, irq disabled
[ 2.029603] cpu cpu0: Looking up cpu-cluster.1-supply from device tree
[ 2.032470] cpu cpu0: bL_cpufreq_init: CPU 0 initialized
[ 2.035911] cpu cpu1: Looking up cpu-cluster.0-supply from device tree
[ 2.039391] cpu cpu1: bL_cpufreq_init: CPU 1 initialized
[ 2.042582] arm_big_little: bL_cpufreq_register: Registered platform driver: dt-bl
[ 2.042821] sdhci: Secure Digital Host Controller Interface driver
[ 2.042827] sdhci: Copyright(c) Pierre Ossman
[ 2.043019] Synopsys Designware Multimedia Card Interface Driver
[ 2.043555] dwmmc_exynos 12200000.mmc:: num-slots property not found, assuming 1 slot is available
[ 2.043619] dwmmc_exynos 12200000.mmc:: IDMAC supports 32-bit address mode.
[ 2.043677] dwmmc_exynos 12200000.mmc:: Using internal DMA controller.
[ 2.043689] dwmmc_exynos 12200000.mmc:: Version ID is 250a
[ 2.043733] dwmmc_exynos 12200000.mmc:: DW MMC controller at irq 90, 64 bit host data width, 64 deep fifo
[ 2.043756] dwmmc_exynos 12200000.mmc:: Looking up vmmc-supply from device tree
[ 2.044266] dwmmc_exynos 12200000.mmc:: Looking up vqmmc-supply from device tree
[ 2.044276] dwmmc_exynos 12200000.mmc:: Looking up vqmmc-supply property in node /mmc@12200000 failed
[ 2.044353] dwmmc_exynos 12200000.mmc:: No vqmmc regulator found
[ 2.044370] dwmmc_exynos 12200000.mmc:: GPIO lookup for consumer cd
[ 2.044378] dwmmc_exynos 12200000.mmc:: using device tree for GPIO lookup
[ 2.044392] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/mmc@12200000[0]' - status (0)
[ 2.044410] dwmmc_exynos 12200000.mmc:: Got CD GPIO
[ 2.044419] dwmmc_exynos 12200000.mmc:: GPIO lookup for consumer wp
[ 2.044426] dwmmc_exynos 12200000.mmc:: using device tree for GPIO lookup
[ 2.044434] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/mmc@12200000[0]'
[ 2.044442] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/mmc@12200000[0]'
[ 2.044449] dwmmc_exynos 12200000.mmc:: using lookup tables for GPIO lookup
[ 2.044458] dwmmc_exynos 12200000.mmc:: lookup for GPIO wp failed
[ 2.044555] platform pwrseq:: GPIO lookup for consumer reset
[ 2.044562] platform pwrseq:: using device tree for GPIO lookup
[ 2.044574] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/pwrseq[0]' - status (0)
[ 2.044593] dwmmc_exynos 12200000.mmc:: allocated mmc-pwrseq
[ 2.073861] dwmmc_exynos 12200000.mmc:: 1 slots initialized
[ 2.074086] dwmmc_exynos 12220000.mmc:: num-slots property not found, assuming 1 slot is available
[ 2.074143] dwmmc_exynos 12220000.mmc:: IDMAC supports 32-bit address mode.
[ 2.074183] dwmmc_exynos 12220000.mmc:: Using internal DMA controller.
[ 2.074196] dwmmc_exynos 12220000.mmc:: Version ID is 250a
[ 2.074237] dwmmc_exynos 12220000.mmc:: DW MMC controller at irq 91, 64 bit host data width, 64 deep fifo
[ 2.074253] dwmmc_exynos 12220000.mmc:: Looking up vmmc-supply from device tree
[ 2.074789] dwmmc_exynos 12220000.mmc:: Looking up vqmmc-supply from device tree
[ 2.075397] dwmmc_exynos 12220000.mmc:: GPIO lookup for consumer cd
[ 2.075405] dwmmc_exynos 12220000.mmc:: using device tree for GPIO lookup
[ 2.075418] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/mmc@12220000[0]' - status (0)
[ 2.075435] dwmmc_exynos 12220000.mmc:: Got CD GPIO
[ 2.075444] dwmmc_exynos 12220000.mmc:: GPIO lookup for consumer wp
[ 2.075451] dwmmc_exynos 12220000.mmc:: using device tree for GPIO lookup
[ 2.075459] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/mmc@12220000[0]'
[ 2.075468] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/mmc@12220000[0]'
[ 2.075474] dwmmc_exynos 12220000.mmc:: using lookup tables for GPIO lookup
[ 2.075483] dwmmc_exynos 12220000.mmc:: lookup for GPIO wp failed
[ 2.103955] dwmmc_exynos 12220000.mmc:: 1 slots initialized
[ 2.105346] s5p-sss driver registered
[ 2.106352] usbcore: registered new interface driver usbhid
[ 2.106360] usbhid: USB HID core driver
[ 2.107531] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.107686] NET: Registered protocol family 17
[ 2.107727] NET: Registered protocol family 15
[ 2.108315] Registering SWP/SWPB emulation handler
[ 2.109476] registered taskstats version 1
[ 2.112391] Btrfs loaded, debug=on, assert=on, integrity-checker=on
[ 2.112480] BTRFS: selftest: Running btrfs free space cache tests
[ 2.112491] BTRFS: selftest: Running extent only tests
[ 2.112525] BTRFS: selftest: Running bitmap only tests
[ 2.112565] BTRFS: selftest: Running bitmap and extent tests
[ 2.112619] BTRFS: selftest: Running space stealing from bitmap to extent
[ 2.113360] BTRFS: selftest: Free space cache tests finished
[ 2.113368] BTRFS: selftest: Running extent buffer operation tests
[ 2.113376] BTRFS: selftest: Running btrfs_split_item tests
[ 2.113443] BTRFS: selftest: Running find delalloc tests
[ 2.158574] usb 1-1: new high-speed USB device number 2 using exynos-ehci
[ 2.257430] mmc0: MAN_BKOPS_EN bit is not set
[ 2.264769] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
[ 2.265540] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
[ 2.267042] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1)
[ 2.267076] mmc_host mmc0: Bus speed (slot 0) = 400000000Hz (slot req 200000000Hz, actual 200000000HZ div = 1)
[ 2.267471] mmc0: new HS400 MMC card at address 0001
[ 2.267985] mmcblk0: mmc0:0001 SDW16G 14.6 GiB
[ 2.268160] mmcblk0boot0: mmc0:0001 SDW16G partition 1 4.00 MiB
[ 2.268327] mmcblk0boot1: mmc0:0001 SDW16G partition 2 4.00 MiB
[ 2.268492] mmcblk0rpmb: mmc0:0001 SDW16G partition 3 4.00 MiB
[ 2.269485] mmcblk0: p1 p2
[ 2.289773] usb 1-1: New USB device found, idVendor=1058, idProduct=0827
[ 2.289783] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 2.289790] usb 1-1: Product: My Passport 0827
[ 2.289797] usb 1-1: Manufacturer: Western Digital
[ 2.289804] usb 1-1: SerialNumber: 575844314535353452464C57
[ 2.509202] BTRFS: selftest: Running btrfs_get_extent tests
[ 2.509456] BTRFS: selftest: Running hole first btrfs_get_extent test
[ 2.509506] BTRFS: selftest: Running outstanding_extents tests
[ 2.509589] BTRFS: selftest: Running qgroup tests
[ 2.509596] BTRFS: selftest: Qgroup basic add
[ 2.509670] BTRFS: selftest: Qgroup multiple refs test
[ 2.549869] Key type encrypted registered
[ 2.549889] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.549901] ima: No TPM chip found, activating TPM-bypass!
[ 2.549998] evm: HMAC attrs: 0x1
[ 2.550698] exynos-dwc3 usb@12000000:: no suspend clk specified
[ 2.550711] exynos-dwc3 usb@12000000:: Looking up vdd33-supply from device tree
[ 2.551243] exynos-dwc3 usb@12000000:: Looking up vdd10-supply from device tree
[ 2.754625] dwc3 12000000.dwc3:: No power optimization available
[ 2.754651] dwc3 12000000.dwc3:: Event buf f06ed000 dma b684a000 length 256
[ 2.754845] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
[ 2.754874] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 3
[ 2.755170] xhci-hcd xhci-hcd.6.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010
[ 2.755219] xhci-hcd xhci-hcd.6.auto: irq 138, io mem 0x12000000
[ 2.755392] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.755401] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.755409] usb usb3: Product: xHCI Host Controller
[ 2.755416] usb usb3: Manufacturer: Linux 4.2.0 xhci-hcd
[ 2.755423] usb usb3: SerialNumber: xhci-hcd.6.auto
[ 2.756088] hub 3-0:1.0: USB hub found
[ 2.756123] hub 3-0:1.0: 1 port detected
[ 2.756618] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
[ 2.756639] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 4
[ 2.756721] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.756845] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.756853] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.756861] usb usb4: Product: xHCI Host Controller
[ 2.756867] usb usb4: Manufacturer: Linux 4.2.0 xhci-hcd
[ 2.756874] usb usb4: SerialNumber: xhci-hcd.6.auto
[ 2.757517] hub 4-0:1.0: USB hub found
[ 2.757548] hub 4-0:1.0: 1 port detected
[ 2.758515] exynos-dwc3 usb@12400000:: no suspend clk specified
[ 2.758576] exynos-dwc3 usb@12400000:: Looking up vdd33-supply from device tree
[ 2.759085] exynos-dwc3 usb@12400000:: Looking up vdd10-supply from device tree
[ 2.962288] dwc3 12400000.dwc3:: No power optimization available
[ 2.962312] dwc3 12400000.dwc3:: Event buf f0719000 dma b6852000 length 256
[ 2.962504] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[ 2.962530] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 5
[ 2.962818] xhci-hcd xhci-hcd.9.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010
[ 2.962862] xhci-hcd xhci-hcd.9.auto: irq 139, io mem 0x12400000
[ 2.963022] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.963030] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.963038] usb usb5: Product: xHCI Host Controller
[ 2.963045] usb usb5: Manufacturer: Linux 4.2.0 xhci-hcd
[ 2.963052] usb usb5: SerialNumber: xhci-hcd.9.auto